Step 1
Cut the cable to the length needed.
Step 2
Strip back the cable 1 inch.
Use the cutter provided with the crimping tool straighten each wire as much as possible between the fingers.
Step 3
Follow this for cross over type cable
Step 4
Bring all of the wires together as closely as possible. Tight for make sure wires not run.
Step 5
With the connector pins facing up, slide the load bar assembly into the connector.
Insure that the wires are firmly seated to the end of the connector.
Step 6
Place the connector into the crimp tool, and squeeze hard so that the handle reaches its full swing.
Step 7
Done doing own Patch cord
2) Replace other keyboard
Step 1
Make sure that the laptop is powered completely off. Unplug the power cord and take the battery out.
Step 2
Remove cover laptop access to the keyboard
Step 3
Once you removed the cover the attachment to the laptop data cable, carefully try to move it out without damaging the cable and remove old keyboard.
Step 4
Pick up new keyboard and attach to the data cable to the connector on the laptop. with the data cable connector, set the keyboard place. be careful do not pull or damage that data cable.
Step 5
If removed any screws from the cover, re-inside those screw well.
3) Change hardisk in desktop
Step 1
Unplug all power cable. Open the desktop case.
Step 2
Unplug data cable and power cable in old hard drive.
Step 3
Plug in data and power cable in new hard drive and put new hard drive in same position as original hard drive
Step 4
Close the desktop case and on power.See that set hard drive correct or not
4) Docking station
Step 1
Step 2
Wait until hard drive detect to PC for transfer data to new PC.
Wait until hard drive detect to PC for transfer data to new PC.
5) Formatting
Step 1
Start up your system, and then press the shortcut keys F8 or F10. Follow the instruction that come up on the screen.
Step 2
Install Bitdefender antivirus. Don't forget to check that windows active or not.
Step 3
Install Mozilla Firefox and google chrome.
Step 4
Install Adobe reader and Java.Set Oracle setting in java configuration.
Upgrade windows 10